Wireless-N USB Network Adapter
• If the network has WPA2 Personal wireless security enabled, then you will see the WPA2 Personal Needed for
Connection screen. Enter the network's Pre-shared Key in the Pre-shared Key field. You must enter the same
security settings used on your network. To connect to the network, click Connect. To cancel the connection,
click Cancel.
Profiles
The Profiles screen lets you save different configuration profiles for different network setups. The table on the left
displays a list of available profiles with their profile names and Wireless Network Names.
Profile - The name of the profile is displayed here.
Wireless Network Name - The SSID or unique name of the wireless network is displayed here.
Profile Information
For each profile selected, the following are listed:
Wireless Mode - This is the mode of the wireless network currently in use.
Wide Channel - This displays the Wireless-N primary channel used with a 40 MHz radio band network.
Standard Channel - This displays the channel used by your wireless network.
Security - The status of the wireless security feature is displayed here.
Authentication - The authentication setting for the network is shown here.
Connect - To connect to a wireless network using a specific profile, select the profile, and click Connect.
New - Click the New button to create a new profile. See the next section, "Creating a New Profile," for detailed
instructions.
Edit - Select the profile you want to change, and then click the Edit button.
Import - Click the Import button to import a profile that has been saved in another location. Select the
appropriate file, and click the Open button.
Export - Select the profile you want to save in a different location, and click the Export button. Direct Windows to
the appropriate folder, and click the Save button.
Delete - Select the profile you want to delete, and then click the Delete button.
Chapter 5: Using the Wireless Network Monitor
Profiles
Figure 5-9: Profiles
NOTE: If you want to export more than one profile,
you have to export them one at a time.
21