Scame electrical solutions ZENITH-P Serie Instrucciones De Instalación, Funcionamiento Y Mantenimiento Para El Uso En Condiciones De Seguridad página 14

ZENITH-P Series [Empty enclosures]
The company : SCAME PARRE S.p.A.
Via Costa Erta, 15 – 24020 Parre (BG) ITALY
Hereby declares that the following products:
(The specific product code and the serial number are indicated in the plate and on the packing.)
Enclosures type ZENITH-P Code 644.xxxx
to which this declaration refers to, comply with:
ATEX DIRECTIVE 2014/34/EU
IECEx Certification scheme
Compliance was ascertained on the basis of the following standards:
EN 60079-0: 2009
EN 60079-11: 2007
EN 60079-7:2007
EN 60079-31:2009
The product also complies with standards EN 60079-0 : 2012+A11:2013, EN 60079-11:2012 and EN 60079-31:2014
since, following the performance of the technical analysis, no substantial changes emerged such as to affect compli-
ance of the product with its ATEX certificate.
ATEX Directive Marking:
0051
(*) The specific data pertaining to: protection mode and ambient temperature are indicated on the plate affixed
inside the box.
The models belonging to this family of products must be certified SIRA 08ATEX3041U (in compliance with Annex III
of the ATEX Directive), IECEx SIR 11.0057 (in conformity to the IECEx diagram) and are subject to notification of the
IMQ 08 ATEX 013 Q quality system (in compliance with Annex VII of the ATEX Directive).
Parre, 20/04/2016
VIA COSTA ERTA, 15 - 24020 PARRE (BG) ITALY - TEL. +39 035 705000 - FAX +39 035 703122 -
CAP. SOC: € 5000000 INT. VERS. - REG. SOC. TRIB. BG N. 7421 - C.C.I.A.A. 136163 / C.C.P. 12614244 - COD. FISC. / PARTITA IVA/VAT/TVA 00137900163
MP37497
Attestation of conformity EU
II 2 GD
Product Development
SCAME PARRE S.p.A.
14
IEC 60079-0: 2007
IEC 60079-11:2006
IEC 60079-7:2006
IEC 60079-31:2008
ATEX/IECEx protection mode *):
Ex e IIC Gb
Ex ia IIC Ga
Ex t IIIC Db IP66
Tamb : da -60°C a +60°C /+75°C
SCAME PARRE S.p.A.
Marketing Manager
Giampietro Camilli Engineer
www.scame.com - scame@scame.com