Uebler i21 Instrucciones De Montaje Y De Uso página 23

Changing bulbs
Attention
When changing bulbs the vehicle ignition must be switched off
and the plug for the lights removed from the towbar electrical
socket. Failure to do so can result in a short circuit or other
damage. If you are not sure, have the bulbs replaced by a
specialist workshop.
Note
The lamp change is described and illustrated using the left tail
light unit on the bicycle rack. The procedure is the same for the
right tail light unit.
Note
When ordering a new bulb, you must specify which bulb it
is (14, 15, 16, 17).
17
Designation
a
14 Indicator
BL C5W 12 V yellow
a
15 Number plate light
BL C5W 12 V (35 mm long) white
a
16 Rear fog light for left tail light unit
BL PR21W 12 V red
a
Reversing light for right tail light unit
BL P21W 12 V white
a
17 Brake / tail light
BL P21/5W 12 V white
a Commercially available bulb.
14
16
9
15
35
1. Remove the screws (45). Press the catches (35) and carefully
lift up the tail light unit (9).
2. With the cable (44) of the tail light unit (9), carefully lift up the
cover (37) and thread it out in the direction of the arrow.
M+P-25A-0204
3. Remove the tail light unit (9) completely from the holder (36).
Spare part
no.
E1687
E1687
38
E1687
E1687
E1687
38
4. Remove the screws (38) and take off the lens (39).
- 21 -
8
44
45
36
36
37
8
37
M+P-25A-0255
39
M+P-25A-0221