Energy Consumption; Prior To Use; Characteristics Of The Product; Instructions For Use - Miniland digitalk easy 89171 Manual Del Usuario

ENGLISH
Any alteration or modification conducted by personnel other than the MINILAND technical
department will render the product guarantee invalid.

3.4. ENERGY CONSUMPTION

The power adapters supplied comply with the European Union eco-design directive (Directive
2005/32/CE).
The consumption of energy is considerably lower than the consumption of other adapters
designed with operation and standby modes.

3.5. PRIOR TO USE

Choosing the right place
· Place the baby unit away from televisions and TV repeaters and radios. The signals generated
by these devices may cause noises or even sounds which are retransmitted on the baby unit. If
this occurs you will need to place the baby unit somewhere else.
· The baby unit should be placed at least 3 metres from the baby´s cot and on a flat surface. The
baby unit should never be placed in the cot, on the bed or playground. Ensure the unit, cables
and adapter are all out of the reach of the baby and small children.
· Place the baby unit where the air is circulating freely, and never on eiderdowns or blankets or
on the edge of a closet, shelf, etc
Place the baby monitor away from sources of heat such as radiators, chimneys, kitchens and
direct sunlight.

4. CHARACTERISTICS OF THE PRODUCT

4.1. FEATURES AND CONTROLS OF THE PARENT UNIT (Figure 1)
1. On / Off button
2. Raise volume button
3. Lower volume button
4. On/Off and charge LED indicator: the permanent green light indicates the device is on, while
the flashing green light indicates the batteries are charging.
5. LED low sound level indicator: remains off when no sound is detected from the baby unit, and
flashes red when a sound is detected (when it is low) in the baby´s room.
6. LED high sound level indicator: remains off when the sound level detected in the baby´s room
is low and flashes red when the baby unit detects a loud noise.
7. Neck strap opening
8. Battery compartment (2 x AAA 1.2V 800 mAh Ni-MH rechargeable)
9. Charger base
4.2. FEATURES AND CONTROLS OF THE BABY UNIT (Figure 2)
10. On / Off button
11. Night light button (short touch) / parent unit search (long touch).
12. LED On / night light indicator: lights up green when the baby unit is on and emits a more
powerful white light when the night light is turned on.
13. Emission mode switch (LOW / ZERO)

5. INSTRUCTIONS FOR USE

5.1. PRIOR TO USE: CONNECTION TO THE POWER AND USE OF THE BATTERIES
The parent unit:
The parent unit of this baby monitor is designed to operate with the batteries or AC/DC adapter
included. The device comes with 2 AAA 1.2V 800 mAh Ni-MH rechargeable batteries for the
parent unit. We recommend using the batteries in the parent unit to enable you to hear the baby
14