Press the button to adjust
the swing angle up and
down. Since this is a universal
remote control, all signals are
transmitted as [
6
[
] stands for the following swing angles:
stop the swing function while the leaves are moving up and
down, the leaves remain in the position they were in when you
stopped the function.
Press the CLOCK button, the clock symbol [ ] flashes. Press
[+] Or [-] within 5 seconds and set the time. Press and hold the
buttons to set the time faster. When you have finished, press
7
CLOCK
CLOCK again to confirm the setting. The clock symbol is now
permanently displayed. If the clock is permanently shown in the
display, the time is shown. If a time but no clock is shown, it is
the timer time.
8
LED
Press the button to switch the LED light on the control panel on
and off.
After you have pressed the button, the clock symbol [ ]
appears in the display and [ON] flashes. The time displayed
is [00:00]. Press [+] or [-] within 5 seconds to set the switch-
on timer. Each time you press one of the buttons, the time is
TIMER
increased or decreased by 1 minute. Press and hold the buttons
9
ON
to set the time faster. When you have finished setting the time,
press TIMER ON within 5 seconds to confirm the setting and
start the timer. If you want to cancel an active on timer, press
TIMER ON again. Before setting the timer, first set the current
time (CLOCK).
].
. If you
EN
39