Flotec FPSC1725X Manual Del Usuario página 2

Safety
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol. When you see this
symbol on your pump or in this manual, look for
one of the following signal words and be alert to the
potential for personal injury.
warns about hazards that will cause serious
personal injury, death or major property damage if ignored.
warns about hazards that can cause serious
personal injury, death or major property damage if
ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
The label NOTICE indicates special instructions which
are important but not related to hazards.
Carefully read and follow all safety instructions in this
manual and on pump.
Keep safety labels in good condition.
Replace missing or damaged safety labels.
DESCRIPTION
This Submersible Utility Pump is designed for draining
water from basement floors, stock tanks, window wells,
boats, flat roofs and cisterns. Unit is equipped with a
3-prong grounding-type power cord. Shaded-pole motor
is oil filled and sealed for cooler operation. Sleeve bear-
ings on the motor shaft never need lubrication.
Automatic reset thermal protection.
NOTICE: This unit is not designed for applications involv-
ing salt water or brine! Use with salt water or brine will
void warranty.
For parts or assistance, call Flotec Customer Service at
All manuals and user guides at all-guides.com
SPECIFICATIONS
Power supply required...............................120V, 60 HZ.
Motor duty...................................................continuous*
Liquid Temp. Range................. Less Than 120° F (50° C)
Individual Branch Circuit Required (min.) .........15 Amps
Pump Discharge ............................................1-1/4" NPT
Adapter...............................................3/4" Garden Hose
NOTICE: For continuous operation, the pump must be
submerged to prevent motor overheating.
explosive atmospheres. Pump water only with this
pump.
PERFORMANCE
ELECTRICAL & SWITCH
SPECIFICATIONS
Risk of fire or explosion. Do not use in
Discharge Feet of Head
0 5
GPH 1320 1170 1020
Motor
Full Load
Motor HP Amps
1/4 5.6
1-800-365-6832
10 15 20 25
810 510 0
Individual Branch
Circuit Required
(Amps)
15
2