Record An Administrator Pin; Record A Common Pin - Steren SEG-150 Manual De Instrucciones

Record an administrator PIN

The administrator PIN has two functions, it allows access control to operate
while it is blocked and open or close the door block conditions. To set the
administrator PIN you must enter the following sequence:
02 indicates that will change the administrator PIN.
The PIN must be entered from 4 to 8 digits.
# To confirm.
The administrator pin can function as a normal PIN to open the door:
The second function can block or allow reading of all cards to prevent access
at night or on weekends:
This will keep the cards to open the door until they repeat the same sequence
with the administrator PIN.

Record a common PIN

The common PIN can be assigned to a group of contacts. You can only record
one common PIN and it must be used in along with one or more cards. To save
the common PIN, enter the following key sequence:
02 + Administrator PIN + #
Administrator PIN + # + 1
Administrator PIN + # + 9
03 + common PIN + #
15