On / Off Button Operation Tone - Steren SEG-150 Manual De Instrucciones

On / Off button operation tone

The operation tone is heard when entering a PIN or a card is read successfully.
This is particularly useful when the lock does not make noise when opened.
This tone also turns off when you turn off all tones. To configure this tone enter
the following sequence:
Where:
72 to indicate that it will set the tone operation.
1 for a one-second tone duration.
0 for two short tones.
# to confirm.
Access LED status
During standby mode, the amber LED blinks. To completely turn off this LED
you must enter the following sequence:
Where:
73 to indicate that it will configure the status LED.
1 to turn on LED.
0 to switch off.
# to confirm.
72 + 1 or 0 + #
73 + 1 or 0 + #
21