Velleman VELBUS VMB1DM Manual Del Usuario página 9

Slow-on dimmer : Operating the push button will turn on the lamp gradually. The time needed for the lamp to burn at full intensity
depends on the rotary switch used to determine the time setting. Operating the push button while the lamp is on will switch off the
5 or D*
lamp immediately.
Slow-off dimmer : Operating the push button will turn on the immediately to full intensity. Operating the push button while the
lamp is burning at full intensity will turn off the lamp gradually. The time needed for the lamp to turn off completely depends on the
6 or E*
rotary switch used to determine the time setting.
Operating the push button while the lamp turns off gradually will immediately turn on the lamp to full intensity.
Slow on/off dimmer : Operating the push button will turn on the lamp gradually.
7 or F* Operating the push button while the lamp is on will turn off the lamp gradually.
The time needed for the lamp to turn on or off depends on the rotary switch used to determine the time setting.
* Modes 8 up to F are used with inductive loads (wire wound transformer).
Remark:
The set mode is only applicable on push buttons connected to the direct push button input and to push buttons connected via the Velbus
which were attributed the mode function in the learning mode (see learning mode).
If the TIME rotary switch is set on 0, the dimmer module will always operate in moment control, regardless of the set operating mode. In
other words: the light bulb will burn as long as the push button is being pressed.
®
9