Teka HPX-750 Guía Rápida De Uso página 29

INCIDENT
The control dial is in position
and the door is still locked.
The control dial is in position
, the oven is cold and the
door is still locked.
I have put the control dial in
position and the door is
unlocked, however symbol
is still lit up and the
remaining time of the cleaning
cycle can be seen on the
display.
CAUSE
The oven has not cooled down
to the safe temperature.
You have not followed the
instructions to cancel the
operation correctly.
You have not followed the
instructions to cancel the
operation correctly.
SOLUTION
Wait until the temperature
lowers and pilot light
off.
1. Turn the control dial to
position and wait for 1
minute.
2. Turn the control dial to
position and wait for 1
minute.
3. Turn the control dial to
position again and wait
until pilot light turns off.
Follow the instructions to
cancel the pyrolysis
programme.
turns
29