Finder 12.92 Manual Del Usuario página 2

GB Instruction Manual - Time switch with Astro function
Connection diagram
3. Menu overview
Menu Program
See point 7 (New program)
New program
To query the programming steps and remaining
Program query
memory locations
Within Program modify each single switching time can
Program modify
be modified.
Deletion of switching time(s). The program for all
channels, single channels and single programming
Program delete
steps within on channel can be deleted.
Copy from one channel to another.
Program copy
5. Key function
Automatic-Mode
To access the Enter-mode (program, adjustments, options)
from the automatic-mode
To switch the channel ON or OFF until the next
programming step occurs.
To activate the time switch when operated without power
supply.
7. Program permanent / Extra switching time / Reset
One permanent by date programming step (holiday function) for each channel is possible. During the desired period (The function is valid for the whole days) the channel can be switched off (permanent off) or on (permanent on).
Permanent
The choice permanent will not be offered anymore within the menu new program when already in use. The switching time can be modified and deleted within Program modify and Program delete respectively. (See Point 8)
You can program further "extra" switching times e.g. if you like to use a channel of the time switch for a non-"Astro lighting-application". You have to activate the "extra switching times" within the menu Options. The "extra switching
Extra
times" works like a standard weekly program (ON / OFF). After activating the "extra switching time" it will be offered within the programming menu "new program". (See Point 8)
switching time
Reset-Function Press all front keys for 2 seconds. The time switch is reset. The values for date and time will be deleted and have to be re-entered. The switching program has not been deleted!
8. New program
12.9X.X.XXX.0090 / Data-key (OPTIONAL)
With a Data-key following activities are possible:
: Writes the data from the time switch into the memory of the Data-key.
Save data
: Writes the data located inside the Key into the memory.
Program timeswitch
: The time switch will solely apply programming steps from the Data-key. The switching program of the time switch is suppressed.
Key function
: To query the switching program of the Data-key.
Key readout
1. Safety instructions
The installation and assembly of electrical equipment must be only
!
carried out only by a skilled Person! Otherwise fire danger or danger of
an electric shock exists!
Connect the supply voltage/frequency as stated on the product label!
!
! Warranty void if housing opened by unauthorised person!
The electronic circuit is protected against a wide range of external
!
influences. Incorrect operating may occur if external influences exceed
certain limits!
Menu Adjustment
Adjustment of date and time
Date-Time
Adjustment of the daylight saving time mode
Summertime
Adjust your geographical position with pre-
defined choice of regions/countries and cities or
Astro
with longitude, latitude and time zone.
Choice of languages
Language
Menu / Enter-Mode
To revert to the beginning of the current (sub-) menu
To adjust the flashing digit. To scroll through a choice
To confirm the selection or the entered data.
2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press -button for 1 second.
The current date and time is already programmed and European daylight savings time is activated.
Select the desired language by pressing
(Remark: By pressing you move one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing
subsequent confirmation with .
When using the astro function it is obligatory to enter the geographical position of the place of the installation of
the device. Choose with -buttons between „location" (pre-defined cities) and „position" (longitude and
latitude). Confirm your choice again with
„locations"-menu.)
Enter the nearest city or the geographical coordinates with
4. Symbol legend
Power plug symbol (flashing): While the power supply is disconnected, the display shows a
power plug symbol (flashing). The time switch is then operated in the reserve mode. Press OK-
button for 1 sec. to "wake up" the time switch.
P
Channel is switched ON / Channel is switched OFF / Permanent
/ /
For the current date the "holiday program" / "permanent by date" is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next
programming step.
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu "program delete"
Astro function: Current state is based on a sunrise or sunset taking into account an optionally
adjusted Offset.
The time switch is locked; to unlock the device the PIN has to be entered.
Menu Options
Extra
See point 8
switching time
The time switch can be locked with a 4-digit PIN-Code. The code can
be adjusted, activated and deactivated. If you have forgotten the Code
PIN-Code
please call customer service.
6. Channel ON OFF / Permanent P
Channel ON OFF
By pushing -buttons ( -buttons) a manual switch of the channels take place. The resulting switching status is
marked with the hand-symbol and remains until the next programming step occurs. (temporary over-ride)
Permanent switching status P
By pressing the corresponding channel button
The status remains until the next manual switching occurs (> 3 sec.). (permanent over-ride)
Complies with Article 11, EU directive 2006/66/CE.
-buttons and confirm it by pressing .
-buttons and a
. (The easiest way is choosing a pre-defined city within the
-buttons and confirm with
for more than 3 sec. the channel is permanently switched ON or OFF.
BATTERY CR 2450 (LiMnO2) 3 V.
BA SC28X_3_4_pro FINDER 12.9X; DE, GB, FR, IT - 22545 - 2010.05-05