LD Systems LAX20D Manual Del Usuario página 15

INSERT POINTS CONNECTION
If you are connecting to a mixing console´s main inserts, you may have a single TRS jack for Send and Return,
in this case, use an insert „Y" cable that is configurated like the samples below.
FOR 1/4" TRS INSERT
Send
Return
Tip
Ring
Sleeve
FOR ThE EXPERTS
AUX SENDS is factory wired as poST-FADER. If you have some skill in electronic components soldering you can
modify this setting and have all your AUX SENDS configured as pRE-FADER.
AUX
(PRE)
Disconnect
POST
the POST route
Before
INSTALLATION & COnneCtiOn:
INSERT LEADS
TIP RING SLEEVE
TIP RING SLEEVE
TIP RING SLEEVE
MODIFICATION ON MONO AND STEREO CHANNELS
Tip
Ring
SLEEVE TIP
Sleeve
SLEEVE RING TIP
Tip
Ring
Sleeve
Tip
Ring
Sleeve
AUX
(PRE)
POST
Tip (Send)
Sleeve
Tip (Return)
Sleeve
1
2 (Send)
3
1
2 (Return)
3
Centre (Send)
Screen
Centre (Return)
Screen
Solder the PRE route
After
15