LD Systems LAX20D Manual Del Usuario página 16

SPECIFICATIONS:
Microphone input
Frequency response
Distortion (THD&N)
Gain range
Mono input channels SNR (Signal noise to Ratio)
Line input
Frequency response
Distortion (THD&N)
Gain range
Line input
Stereo input channels Frequency response
Distortion (THD&N)
Microphone input
All other inputs
Impedances
Tape out
All other output
Hi shelving
Mid bell (mono)
Hi mid (stereo)
Equalization
Mid low (stereo)
Low shelving
Low cut filter
A/D and D/A converters
DSp resolution
DSp Section Type of effects
presets
Controls
Noise (Bus noise)
Main Mix Section
Max output
AUX returns gain range
AUX sends max out
Main voltage
power supply
(AC7AC Adaptor)
power consumption
physical
Dimension (WxDxH) mm
Net weight
Since all our products are constantly controlled and improved, technical changes are possible without prior notice.
Electronically balanced, discrete input configuration
10Hz to 45kHz, +/-3dB
0dB to 40dB (MIC)
102dB
102dB
Unbalanced
10Hz to 45kHz, +/-3dB
0.005% at +4dBu, 1kHz
+ 15dBu to -25dBu (Line) 0dB - 40dB (MIC)
Unbalanced
10Hz to 20kHz, +/-3dB
0.005% at +4dBu, 1kHz
3.6kohm
10kohm or greater
1kohm
120ohm
+/- 15dB @ 12kHz
+/- 15dB @ 100Hz to 8kHz
+/- 15dB @ 3kHz
+/- 15dB @ 500Hz
+/- 15dB @ 80Hz
75Hz, 18dB/oct.
24 bit / 96 kHz
24 bit
Echo, Echo + Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room,
Flanger + Verb, Large Hall
100
The presence of 100 different effects is available
Fader 0 dB, channels muted: -100dBr (ref.:+4dBu)
Fader 0dB, all input channels assigned and set to
UNITY GAIN: -90dBr (ref:+4dBu)
+22dBu balanced XLR, +22dBu unbalanced 1/4" jack
OFF to +15dB
+22dBu
USA/Canada 100-240VAC ~, 60/50Hz
Europe 210-230V ~, 50Hz
U.K./Australia 240V ~, 50Hz
40W
420x540x90/45
7,6 kg without adapter