Battery Installation; Start The Trooper Bot - Xtrem Bots TROOPER BOT Manual Del Usuario

3. batteries installation
in the transmitter
1. Use a philips' head screw to open the butt on cell gate of controller.
2. Put 2 x 1.5V "AA" batt eries inside the batt ery box.
3. Put the gate back and use a screw to ti ghten the gate.
in the robot
Robot batt ery is into the back of the Trooper Bot.
To charge batt ery, please insert the USB port provided USB charging cable to anyone USB port of a
computer, a power pack, a mobile charger or a car USB charger.
Switch OFF the robot before charging. A light in the robot will be turned on during the chargins process;
when the robot is fully charged the light will turn off .
The charging ti me is about 2 hours and the playing ti me is about 2 hours.

4. start the Trooper Bot

Switch on the ON/OFF butt on on the back of the Trooper Bot and
push the "StandBy" butt on to start the Trooper Bot. The Trooper Bot
introduce himself performing some movements and sounds.
NOTE: The robot should stay on the fl oor.
6