Standby Button; Demo Mode; Programming; Dance Mode - Xtrem Bots TROOPER BOT Manual Del Usuario

6. StandBy button

After 2 minutes of inactivity, the robot enters StandBy mode
automatically.
Before the robot go into StandBy mode, it will emit some sounds in
advice.
By pressing the button the Trooper Bot goes on StandBy Mode and
stays sleep until this button would be pressed again. By pressing it
again the robot will wake up and will perform the "intro" again.

7. demo mode

Press the "Demo Mode" button on the transmitter. Trooper Bot will
show some dance, sounds and movements functions.

8. programming

1. Press the "Programming" button until hear a `beep' sound.
2. Up to 50 functions can be programmed. You can glide forward,
glide back, walk forward, walk backward, turn left, turn right, dance
or make shoots.
3. Press "Programming" button to perform programmed functions
again.
4. When it is not in use atomatically exit.

9. dance mode

Press the "Robot Dance" button on the
transmitter.
The Trooper Bot will perform a dance.
8