Cleaning The Filter - Taurus STUDIO 2000 IONIC Manual De Instrucciones

Ocultar thumbs Ver también para STUDIO 2000 IONIC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
flow into one specific area.
- Attach the unit to the product by pressing until
you hear a click (Fig.1).
DIFFUSER ACCESSORY (FIG.C):
- This accessory is used to harmonize the air
flow into one specific area.
- Attach the unit to the product by pressing until
you hear a click
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.

CLEANING THE FILTER:

- The air inlet filter should be cleaned periodical-
ly for proper operation of the device.
- To remove the filter (F), turn it to the left and
pull it out (Fig. 2)

Publicidad

Tabla de contenido
loading

Tabla de contenido