COLUMBIA VAC OPC 120 Manual Del Usuario página 20

• It first accumulates at the lower levels, but can be distributed by air movement (e.g., by fans).
• If propane is present, or its presence is even just suspected, it is forbidden to allow unqualified
personnel to try to find the cause.
• The R-290 (propane) used in the device is odourless.
• No odour does not mean that no gas is escaping.
• In the event of leak detection, evacuate all persons from the room, ventilate the room, and
contact the local fire service in order to report the propane leak.
• Do not allow anyone into the room until a qualified service technician arrives and affirms that
entering the room is safe.
• Do not use tools other than those recommended by the manufacturer during defrosting and
cleaning.
• The device should be placed in the area free of fixed ignition sources (e.g., an open fire, or
operating gas or electric equipment).
• The device's components are specially designed for the use of propane, and have no ignition or
sparking properties. Replace the components only with identical spare parts.
• Do not allow the housing to be punctured. Do not burn the device.
• The unit must be installed, operated, and stored in a room bigger than 4 m2.
• If the unit is installed, operated, or stored in a room without ventilation, measures should be
implemented preventing the accumulation of leaking coolant, the causing of a fire, or an
explosion hazard due to the ignition of the coolant caused by an electric heater, stove, or other
ignition sources.
• Store the device in a way which avoids mechanical damage.
• Persons operating or modifying the cooling circuit must hold the appropriate authorisations
from an accredited organisation to guarantee the professional handling of the refrigerant, which
must be confirmed by reputable industry organisations.
• All repairs should be performed according to the manufacturer's recommendations. Maintenance
and repairs requiring the employment of experts in other fields should be carried out under the
supervision of a person authorised to use flammable refrigerants.
---------------------------------------------------------------------------------------------------------------
• This device is intended for home use only, as described in this Instructions Manual. Do not use
the device for purposes other than those specified in this Instructions Manual.
• Installing the air conditioner does not require special knowledge, and may be performed by
the user in accordance with the guidelines and figures contained in the Instructions Manual.
Improper installation can result in water leakage, or electrocution, or irreparable damage to the
unit. Eldom Sp. z o. o. shall not be liable for any potential losses due to the improper use of the
device.
• The unit must be installed in accordance with the national regulations for electrical systems.
Before connecting the device to the mains, check that the mains current parameters (voltage)
correspond to the parameters indicated on the device. The device's outlet plug should be
completely plugged into the power socket. Do not use extension cords or multi-outlet adapters
to connect the device's power cord. Remove the outlet plug from the socket if the device is not
to be used for an extended period. If the unit has not been used for a long time, check that the
air inlets and outlets are unobstructed before starting the device.
• Connect the device only to an earthed power socket.
• Keep the device at least 50 cm away from flammable material and substances (e.g., alcohol, etc)
or pressurised containers (e.g., aerosols).
• The power cord and plug are intended for the final disconnection of the device from the power
supply, which is why they must be easily accessible at all times.
• Switch off the air conditioner and disconnect it from the power supply during a storm.
• Do not insert hands or objects into the air outlets.
20