SEVERIN CP 3544 Instrucciones De Uso página 12

attachment. Ensure that the recesses on
the large dome attachment clasp over
the wings of the small dome attachment.
Operation
∙ Assemble the appliance as described
above.
∙ Place a suitable container under the
spout. Push the spout down.
Tip!
The juice can also only be removed
after the juicing process. To do this,
fold the spout upward. During the
juicing process, watch the amount of
juice in the juice container and do not
exceed the Max. mark.
∙ Insert the power plug into a wall socket.
∙ Halve the citrus fruit and press one half
with the cut surface down onto the dome
attachment.
∙ Push the lever arm down.
∙ Pressing down on the citrus press will
switch it on and releasing pressure will
switch it off again.
Tip!
The amount of pulp in the juice can
be determined with the pulp regulator:
= sieve open → higher pulp
content
= sieve closed → lower pulp
content
∙ When processing larger quantities of
fruit, the pulp sieve must be emptied
from time to time as necessary.
∙ After use, fold the juice spout upward
and switch off the appliance.
12
∙ Disconnect the plug and clean the
appliance.
Cleaning and care
∙ Before cleaning the appliance, remove
the plug from the wall socket.
∙ To avoid any risk of electric shock, do
not clean the appliance with liquids or
immerse it in a liquid.
∙ Do not use abrasives, harsh cleaning
solutions or hard brushes for cleaning.
∙ The main unit may be wiped with a
slightly damp, lint-free cloth.
∙ The fruit holder can be released by
pressing the black circle on the lever
arm. After cleaning, insert the fruit
holder back into the lever arm with firm
pressure.
∙ The pulp sieve can be taken apart
for easier cleaning. To do this, loosen
the assembly knob counterclockwise.
After cleaning, reassemble the sieve
as described under 'Assembling the
appliance'.
∙ Clean the removable accessories in
warm water with the addition of a typical
dish detergent and dry them thoroughly.
∙ The removable accessories can also be
cleaned in the dishwasher.