Setting The Temperature Limit D - DURAVIT D.1e D11100008010 Manual De Instrucciones

3. Light ring lights up BLUE
> Check if cold water
is flowing.
EN
If the diagnostic function is complete, the light ring flashes
ORANGE twice and the functional test was successful.
If the light ring flashes ORANGE three times, there is a
malfunction in the temperature sensors. Customer Services
must be contacted.
5.6 Setting the temperature limit
A maximum temperature is not set in the factory.
> Press and hold until the light ring lights up WHITE. Release the
button immediately.
Water is on. Light ring flashes WHITE.
> Rotate to set the desired maximum temperature.
> Press 1x: Temperature is saved as the maximum temperature.
The light ring flashes WHITE twice to confirm.
26
If no cold water is flowing:
Check the cold water supply line.
- Is the cold water supply line open?
- Is the dirt filter OK?
- Is the cold and hot water supply
connected correctly?
D