Browsing The Setup Menu - Promax DT-800 Manual De Usuario

The first module that appears after entering the CONFIGURATION menu, is the
control unit DT-800. The order of appearance of the rest of modules may vary
depending on the location and connection of the modules at the rack and the automatic
assigment made by the control unit when booting.
To get into the available settings of a particular module, press ENTER
the module is displayed on the screen.
Every time you see a display module, the LED program of this module began to
blink.

4.7.2 Browsing the SETUP menu

1.- From the SETUP screen, pressing LEFT
see what modules are available.
2.- When you have the module you want to configure on the screen, press
ENTER
3.- Once inside the setup menu, press the Arrow keys LEFT
RIGHT
4.- When the menu option you want to access is displayed, press ENTER
5.- An arrow on the left-side of the selected option, means that you are into
the menu (Fig. 13.-). Now you can change the value displayed on the
screen or move to another menu.
Page 18
Figure 12.- Initial setup screen.
.
to move through the module setup options.
or DOWN
CONTROL MODULE. DT-800
or RIGHT you can
04-2012
when
or