Promax DT-800 Manual De Usuario página 70

4.- When finished press UP
- ONID Config
It allows you to edit the number that identifies the original network. It is a
numeric field.
- NID Config (Network Identifier Configuration).
Enter a valid NID for your country. It is a code that identifies the
distribution
http://www.dvbservices.com/identifiers/network_id
- NIT VERSION
It is a private table about information of the Network This menu has two
options: MODE and VERSION NUMBER. When MANUAL mode is selected
then the version number of the NIT table chosen at the menu VERSION
NUMBER
version of the NIT table increments as the contents of the NIT changes.
- Network Name
It allows you to assign a name to the distribution network. It is a text field.
- LCN Config (Logical Channel Number Configuration).
It allows you to change the logical channel number. This is the number from
which programmes are stored in the TV receiver. It is a numeric field.
- Private Data Specifier
It is used to define who is generating the private data that appears in the NIT.
The identifier codes are available at:
"http://www.dvbservices.com/identifiers/private_data_spec_id."
- Ethernet Config.
It allows you to modify the parameters of connection to the data network. It
contains a sub-menu with some options to define the parameters of the
network: IP address, mask and gateway. All these fields are numeric.
- Display Contrast.
It allows you to change the display contrast of the control module among
these values: Low , Medium and High.
- Language
It allows you to select the language displayed on the configuration menu
(English or French).
- Save All Modules.
It saves all changes made and validated of all the modules. After entering,
press ENTER
Page 24
http://www.dvbservices.com/identifiers/original_network_id
network in each
by the user is fixed. When AUTO mode is selected then the
to confirm you want to save your changes.
CONTROL MODULE. DT-800
.
country. It is a numeric field.
04-2012