Important; Knob Lighting; Timer (If Any); Timer: Programming Of The Time To - Fulgor Milano FPH G Serie Instalación, Uso, Mantenimiento

IMPORTANT

•
use of the appliance produces heat and
moisture in the room where it is installed.
Make sure the kitchen is sufficiently
ventilated; keep natural ventilation holes
open or install mechanical ventilation
devices (such as a hood).
•
Prolonged use of the appliance may
require additional ventilation, such as
opening a window.
GAS PROTEKT
•
on floors with thermoelectric protection do
not keep the ignite button pushed for more
than 15 seconds. If the burner has not
ignited after 15 seconds, open the door
of the room and wait at least one minute
before making a further attempt.
Knob lighting (if any)
When a knob is turned away from the OFF
position, it will light up (white).
When a burner is in use and is then turned off,
the knob lights up red, giving the "hot burner"
warning. The light goes out after the burner has
had time to cool down.
Timer (if any) (fig.3)
3 Functions:
•
TIMER - programmed switch off
•
TIMER - acoustic signal
•
KEYPAD LOCK
F B
A
Fig 3
A = ON/OFF button
B = Increase / Decrease keys
C = Timer Button
D = Display
E = Cooking zones selection keys
F = Indication LED: Flashing (Associated
with the display) / Fixed (active)
TIMER: Programming of the time to switch
off a burner
With the device it is possible to set independently
for each of the burners a time after which the
burner switches off automatically.
ATTENTION
Turning the knob to the OFF position will
always turn off the corresponding burner,
even if the timed function is active.
D B F
C
F
E
EN
3