Instructions For The Installer; Installation; Positioning - Fulgor Milano FPH G Serie Instalación, Uso, Mantenimiento

Instructions for the installer

EN

Installation

This appliance is not provided with a combustion
product discharge. It is recommended that it be
installed in sufficiently aerated places, in terms
of the laws in force. The quantity of air which
is necessary for combustion must not be below
2.0 m /h for each kW of installed power.
3
See table of burner power.
Note: the device is in installation class 3. The
appliance's
are shown on the plate attached to its
housing.
Fig 4
6
adjustment parameters

Positioning

(Fig. 4). The appliance can be fitted into a
working area as illustrated on the corresponding
figure. Before positioning the hob, fit the seal
around the entire periphery of the hole cut
in the worktop.
Guarnizione
Sealant seal
sigillante
Guarnizione
Sealant seal
sigillante