Bt Connection And Playback; Aux In - auna Birmingham Manual Del Usuario

Important notes
• The automatic return system is mechanically designed and the reset
point can be influenced by the transport. Therefore, the tonearm may
automatically return to the holder the first time it is placed on the
record. This is not a malfunction.
• The length of the record can vary. If you notice that the tonearm cannot
return automatically after the record has been played, please return the
tonearm to the rest position manually or set the automatic return point.

BT CONNECTION AND PLAYBACK

1 To select the BT mode, press the MODE key (15).
2 Press the OK button to confirm.
3 The display (2) shows [No media] and the BT icon.
4 Hold down the MENU/INFO key (10) and press the up/down arrow keys
(7) to select [Setup BT]. Press the OK key to confirm.
5 The BT symbol blinks on the display (2) and the display shows [BT
Discoverable], indicating that the machine is in search mode.
6 Enable BT on your external smartphone or tablet, and select the device
named [Birmingham] to connect to the audio system.
7 Once the connection between the two devices is established, the BT
icon lights continuously on the display (2).
8 Start music on your external device and listen to it through the audio
system.

AUX IN

Connect another audio device, such as a portable CD player, MP3 player,
cassette player, iPod, etc., to the aux-in port on the side of the device using
a 3.5 mm connection cable (not supplied). Press the MODE button to select
Aux In mode and press the OK button to start playback.
EN
39