Indicators, Keys And Relays; Front Indicators; Keys - Elkron FKP500 Manual De Instalación

4
4.1

FRONT INDICATORS

Indicator
Alarm
Fault
Excluded
System Fault
Test
AC/BAT
4.2

KEYS

Keys
"<" ">"
"" ""
Reset
Lamps Test
Silence/Ream Siren
Skip Delay
Increase Delay
ACK (Acknowledge)
20

INDICATORS, KEYS AND RELAYS

Description
Red LED indicator; when it is on an alarm condition is present on the
control panel.
Yellow LED indicator; when it is on a fault condition is present on the
control panel.
Yellow LED indicator; when it is on an exclusion is present on the control
panel.
Yellow LED indicator; when it is on a system fault is (memories corruption
or program supervisor activated) is occurred on the control panel.
Yellow LED indicator; when it is on a test is active in control panel.
Yellow LED indicator; when it is on the control panel is powered by the
mains. When blinking the control panel is powered only by its batteries.
Description
Selection of the event type shown on the display.
Rotation of messages shown on the display.
Control panel reset key (general reset). Enabled via a mechanical
key.
Key to test the lit and acoustic indicators. It activates the indicators
for some seconds.
Key for silencing or ream sirens according when an alarm
condition is active. Enabled via a mechanical key.
Key for skip the delay when an delayed alarm condition is active.
Enabled via a mechanical key.
Key for increasing alarm delay when a delayed alarm condition is
present. Enabled via a mechanical key.
Key for acquiring an event. Acquisition of an event requires
silencing the panel and control panel buzzers.