Relays - Elkron FKP500 Manual De Instalación

According to the standard EN 54-2, on the front end of FKP500 Consolle a mechanical key is
present allowing to disable the keypad in order to prevent improper use.
To disable the keypad, place the mechanical key to OFF; to enable it, place it to ON.
The keypad is only active after programming the presence of remote panel at control panel.
When the panel is acknowledged by control panel, and control panel checks for the panel to be
present, on the top of the display, at the left, characters "*" and "-" appear in turn.
For further information, refer to control panel programming manual
4.3

RELAYS

FKP500 Consolle has a relay which is directly driven by the control panel when an alarm condition
is active.
21