Operation - Elkron FKP500 Manual De Instalación

In normal operation conditions, the same information appears on the display as on control panel;
on the first line of the display, there is shown information typical of FKP500 Consolle such as the
address and control character of call from control panel.
FAP54-04
Master Control Panel
During normal operation and according to the control panel status, the four first rows shown as
indicate:
Where

ACTION DELAYED means that in control panel is active a delay of the activation

SIREN FAULT indicates that the siren output of the control panel is in fault condition

SIREN EXCL/SILEN means that the siren output of the control panel is excluded or silenced

COM-E these are the indications of the type "E" alarm transmission routing equipment

COM-J these are the indications of the type "J" fault transmission routing equipment
o TX becomes TXA/F indicates that an alarm/fault message has been sent from the
control panel
o
RX becomes RXA means that an alarm received confirmation has been received from
the control panel
o
PRES/ESCL indicates the presence or exclusion of the routing equipment.
22
5

OPERATION

Panel address
CONSOLLE ID 10
FIRE PREVENTION SYSTEM
19/06/08
CONSOLLE ID 10
ACTION DELAYED
SIREN FAULT
SIREN EXCL/SILEN
11:50
COM-E: TXA/RXA/PRES.
COM-J: TXF/PRES.