Special Safety Instruction; Power Source; Description Of Assembly - SportTech F50 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2. SPECIAL SAFETY INSTRUCTION

POWER SOURCE

Place the treadmill where the plug can reach the socket.
Directly insert the power line into socket and keep it firm.
Please use qualified socket to avoid consequential danger. If the plug and socket are incompatible, ask the
electrician to deal with it instead of removing the plug.
220V – 240VAC power source is to be used.
Please keep power line away from roller, and don't place power source on running belt or use damaged plug.
Please pull the plug out from the socket before cleaning and maintenance.
WARNING: failing to pull out the plug may cause personal injury and damage to equipment.
Please inspect each component before use.
Please don't use the product outdoors, at high humidity and in the sunshine.
Please turn off the machine and pull out the plug when leaving.

3. DESCRIPTION OF ASSEMBLY

Please carefully read steps of assembly before installation.
Take out all wrappages and place them on clean ground, where is convenient for you to check and install.
Carefully check whether components are complete according to packing list.
Please pay attention to safety when using tools or handling. Please don't install forcibly as you like in assembly.
Please confirm whether the tools and packing materials left are dangerous. Plastics and foam are harmful to kids.
Assemble the product according to the instruction. Please carefully read steps and description of assembly.
The product must be carefully installed by adults, and by professionals if necessary.
WARNING: carefully install the product without damaging it.
52

Publicidad

Tabla de contenido
loading

Tabla de contenido