Using Your Smart Air Purifier; General Operation; Sleep Mode - Levoit Core 200S Manual De Usuario

EN
U S I N G YO U R S M A R T A I R P U R I F I E R
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features.

General Operation

1. Plug in and tap
purifier. The fan will start on level I.
[Figure 3.1]
2. Optionally, tap
between I, II, and III.
Note:
•
The indicators are not buttons and cannot
be used to change the fan speed.
•
The fan speed indicators will light up when
active.
•
Fan speed III is the loudest, but cleans air
the quickest.
•
For best results, or to address a specific
air quality issue such as smoke, run the air
purifier at high speed (level III) for 15–20
minutes before using a lower speed.
•
To effectively clean air, keep windows and
doors closed while the air purifier is on.
3. Tap to turn off the air purifier.
10
to turn on the air
to change fan speed
Figure 3.1

Sleep Mode

Sleep Mode dims all icons to half brightness
and operates quietly by using a fan speed
lower than fan speed I.
Tap to turn Sleep Mode on.
Note:
•
Tapping will exit Sleep Mode.
•
You can still adjust the night light while the
air purifier is in Sleep Mode.
Timer
You can manually set a timer for 2, 4, or 8
hours using the display buttons. You can
also set a timer for 1 to 24 hours through the
VeSync app.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
•
The indicators are not buttons and cannot
be used to select a time.
•
The timer indicators will light up blue when
active.
•
indicator lights up when a timer is set
up through the app.
Once the timer has finished, the air
2.
purifier will turn off.
3. To cancel a timer, tap
indicators are off.
Note:
•
You can change the fan speed at any time
while the timer is on.
•
The timer will restart if the time is changed.
until all timer