Layout And Items Supplied; Proper Use; Technical Data - EINHELL TC-MX 1400 Manual De Instrucciones

Additional safety instructions
a) The equipment must not be used in environ-
ments with potentially explosive atmospheres.
Do not mix any solvents or solvent-based
materials with a fl ash point below 21°C.
b) Do not run any cables over any parts of your
body.
c) Only use an extension cable which is appro-
ved for the type of work.
d) You are required by law to wear close-fi tting
clothing.
e) The equipment should be operated via a re-
sidual current protective device (PRCD) with
a rated trip current of no more than 10 mA in
order to avoid danger.
f) Keep water away from all parts of the electric
tool and from persons in the work area.
g) Only start up and run down the equipment
when it is in the mixing tub. Ensure that the
mixing tub is stood in a secure and stable po-
sition.
h) Do not reach into the mixing tub with your
hands or any objects while mixing is in pro-
gress.
i) When working with the mixer, we recommend
that you wear work gloves, goggles and ear
protectors.
j) Take the reaction torque into account. During
operation always hold the equipment fi rmly in
both hands.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. On/Off switch
2. Locking knob
3. Speed control
4. 1st gear / 2nd gear switch
5. Mixer holder
6. Mixer
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Anl_SA_TC_MX_1400_SPK8.indb 24 Anl_SA_TC_MX_1400_SPK8.indb 24
GB
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Paint and mortar mixer
•
Original operating instructions

3. Proper use

The machine has been designed to mix liquid
and powderery building materials such as paint,
mortar, adhesive, plaster and similar substances.
The relevant mixing action (which depends on the
consistancy of the materials and the quantity that
has to be mixed) must be set up for the appropri-
ate mixing tool.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
- 24 -
23.08.2018 08:57:11 23.08.2018 08:57:11