Getting Started; Using Presets - Fender MUSTANG MINI Guia De Inicio Rapido

Getting Started

To set up your Mustang™ Mini amplifier:
1. Plug in the power adapter cord or install 6 "C" cell batteries.
2. Plug your guitar into the INPUT jack.
3. Press the POWER switch to turn the amplifier ON.
4. Adjust the MASTER volume level.
♫
MASTER volume is the only knob you need to adjust at first. All
other knob settings are programmed as part of each PRESET!

Using Presets

Use the PRESET knob to select one of 24 presets. Presets are stored in
three banks, colored AMBER, GREEN and RED, in the following order:
AMBER 4 GREEN 4 RED
Each preset is based on one of the eight amplifier types labeled next to
each of the preset LEDs , and may include effects which can be turned
"off" with the EFFECTS knob.
♫
The RED and GREEN banks are for storing your own presets.
The AMBER bank of presets can only be modified using Fender®
FUSE™ software, available free of charge at fuse.fender.com.
Programmable Knobs
Your Mustang amplifier gives you the powerful ability to save every setting
on the amplifier as part of a preset. When you select a preset, the levels of
6
MUSTANG
1 2 3
f e n d e r . c o m
™ MINI
each knob, including effects, are instantly loaded to your pre-programmed
settings! Because the setting of every knob on your Mustang ampli-
fier (except MASTER) is programmed into each preset, the position of each
knob will NOT show the actual knob setting when you first select a preset.
The programmable knobs are "inactive" until turned.
Simply turn a knob to activate it and adjust its current setting. The knob
will remain active until you select a different preset, at which time all
the programmable knobs become inactive again.
Rotate knobs to activate.
♫
You may hear a significant change in volume or tone when you
first turn a programmable knob as the Preset setting for the
knob instantly shifts to the activated knob position.
Effect Selections
A1:
Chorus
A2: Flanger
A3: Phaser
B1:
Vibratone
B2:
Vintage Tremolo
B3: Octave Down
C1: Small Room Reverb
C2: Fender '65 Spring Reverb
C3:
Stereo Tape Delay
D1:
Tape Delay + Room Reverb
D2: Chorus + Hall Reverb
D3: Vibratone + Room Reverb
Turn the EFFECTS knob to select one of 12 effects. Select "OFF" for no
effects. Press and hold the EXIT button while turning the EFFECTS knob
to adjust the effects level. Additional effects selections and parameters
can be accessed with Fender FUSE software.
Advanced Features
The SAVE button will light up when you turn any programma-
ble knob on the amplifier. This means that you have tempo-
rarily modified the current preset. You can undo your modifi-
cations simply by selecting a different preset using the PRESET knob.
♫
To learn how to save presets, edit effects, connect your Mustang
Mini to your computer, and much more, please download the
Advanced Owner's Manual for the Mustang Mini amplifier from
www.fender.com/support.
1 2 3
1 2 3