Installing A Radio Piggy-Back In An Inverter; Ways Of Installation - SMA BEAMPB-NR Manual Del Usuario

Installing a Radio Piggy-Back in an Inverter

1 Installing a Radio Piggy-Back in an Inverter
DANGER!
Lethal danger caused by high voltages in the inverter.
• All work on the inverter must be carried out by a qualified electrician.

1.1 Ways of Installation

The installation of the Radio Piggy-Back and the antenna is determined by the scope of delivery.
For scope of delivery (A) please refer to section "Installation (A): Radio Piggy-Back and
•
Antenna" Page 13 .
For scope of delivery (B), with the Radio Piggy-Back installed at the factory, please refer to
•
section "Installation (B): Antenna, Piggy-Back ex Factory" Page 15.
12 BEAMPBNR-BXX072623
SMA Solar Technology AG