Briggs & Stratton CleanShot 2050PSI Manual Del Propietário página 6

CleanShot
TM
2050 PSI PressureWasher
CleanShot
ASSEMBLY
IMPORTANT: Read entire owner's manual before you
attempt to assembleor operate your new pressure washer.
Remove Pressure Washer From
Carton
I. Remove the parts bag,accessories,and inserts included
with pressure washer.
2. Slice two corners at the end of carton from top to
bottom so the panel can be folded clown fiat.
3. Remove pressure washer from carton.
Carton Contents
Items in the carton include:
Main Unit
High Pressure Hose
SprayGun
Nozzle Extension
Turbo Nozzle
Utility Brush with Adapter
Accessory Storage Bag
Safety Goggles
Oil Bottle
Parts Bag(which includesthe following):
Owner's Manual
Engine Manual
Owner's Registration Card
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,call the
pressure washer helpline at 1-800-743-4115. If calling for
assistance,please have the model, revision, and serial
number from the data tag available.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fill out and send in registration card.
2. Add oil to engine crankcase.
3. Add fuel to fuel tank.
4. Connect high pressure hose to spray gun and pump.
5. Connect water supply to pump.
6. Attach nozzle extension to spray gun.
Add Engine Oil and Fuel
• Place pressure washer on a level surface.
CAUTION
• Refer to engine manualfor oil andfuel fill information.
• Damage to equipment resulting from failure to follow this
instructionwill void warranty.
• Refer to engine owner's manual and follow oil and fuel
recommendations and instructions.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
/
6