Cisco Linksys USB200M Guía De Instalación Rápida página 2

1
Connecting the Compact USB 2.0
10/100 Network Adapter to Your PC
A
With your PC turned off, insert
the Adapter's USB end (or the
end of the USB extension cable
connected to the Adapter)
into your PC's USB port or USB
hub.
B
Insert one end of an Ethernet
network cable into the
Adapter's RJ-45 port.
C
Insert the other end of the
Ethernet network cable into an
Ethernet networking device.
Proceed to Step 2.
2
NOTE: For maximum speed,
connect the Adapter to a USB
2.0 port on your PC. If you are
using a hub, make sure it is a
USB 2.0 hub.