Compliance Information - ViewSonic IFP2410 Guia De Inicio Rapido

Compliance Information

Please read before proceeding
• Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void
your warranty.
• Do not store your device in temperatures higher than 50°C (122°F).
• The operating temperature for this device is from 0°C (32°F) to 35°C (95°F).
Connect the power cord from the unit to a grounded AC outlet. Ensure that the power source is within the operating
voltage of the display. The operating voltage can be found on the device label. The device uses either 110 to 127 volts
alternating voltage or 220 to 240 volts alternating voltage and 50/60 Hz.
CAUTION: To avoid damage to the unit, be sure to use only the power cord that came with the unit.
CE Conformity for European Countries
The device complies with the relevant section of the Low Voltage Directive 2014/35/EC, Eco-Design Directive
2009/125/EC, RoHS Directive 2011/65/EU, WEEE Directive 2012/19/EU, and Radio Equipment Directive 2014/53/
EU
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement 2014/53/EU, Council Recommendation of 12 June 2014 on
the limitation of exposure of the general public to electromagnetic fields (0-300 GHz). This equipment meets the following
conformance standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament
and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2
Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Substance
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Bis(2-ethylhexyl) phthalate (DEHP)
Butyl benzyl phthalate (BBP)
Dibutyl phthalate (DBP)
Diisobutyl phthalate (DIBP)
Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below:
Examples of exempted components are:
1. Lead in glass of fluorescent tubes not exceeding 0.2% by weight.
2. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
3. Copper alloy containing up to 4% lead by weight.
4. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
5. Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors,
e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter,
Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan: http://recycle.epa.gov.tw/
Copyright Information
Android, Google, Google Play, the Google Play logo and other marks are trademarks of Google Inc.
Proposed Maximum Concentration
0.1%
0.1%
0.01%
6+
) 0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
i
Actual Concentration
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
< 0.1%
< 0.1%
< 0.1%
< 0.1%