Satco 65-521 Instrucciones De Instalación Y Seguridad

LED UFO HI-BAY FIXTURE
Models: 65-521, 65-522, 65-523, 65-524, 65-525, 65-526
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
• To avoid damage, falling, electric shock or fire, do not modify the fixture or replace
accessories without confirming with the supplier first.
• Only authorized, qualified personnel should install this fixture and should follow
the owner's manual. Any improper installation might cause failure, electric shock,
fire or other injury, damage or hazard.
• Disconnect power before installation or any maintenance of the fixture.
• Do not dismantle the fixture without the supplier's authorization.
• Do not touch the power supply when the fixture is operating.
• The external flexible cable or cord of this fixture cannot be replaced; if the cord
is damaged, the fixture shall be destroyed.
• For use in environments where an accumulation of non-conductive dust on the fixture
may be expected.
• Mounting heights of fixtures are not to exceed higher than 30m.
IMPORTANT:
This product must be installed in accordance with the applicable
installation
code by a person familiar with the construction and operation of the product and the hazards involved.
SPECIFICATIONS
Model Watts Volts
65-521 100W
65-522 100W
65-523 150W
277-480V
65-524 150W
65-525 200W
65-526 200W
DIMENSIONS
65-523, 65-524
© Copyright 2019 Satco Products, Inc. 7/19
CCT CRI Operating Temperature
4000K
5000K
-30°C to +50°C (-22°F to +122°F)
4000K
70+
L
5000K
N
4000K
-30°C to +40°C (-22°F to +104°F)
5000K
GND
240
(9.45")
65-521, 65-522
65-525, 65-526
GND
brown black
blue white DIM+
yellow/green green
DIM-
Removable
3/8" Thread for
pendant mounting
WIRING DIAGRAM
L
brown black
N
blue white
yellow/green green
Dimmable
Dimmable
purple
gray
INSTALLATION
Satco Products, Inc.
Brentwood, NY 11717
DIM+
DIM-