Satco NUVO 65-181 Instrucciones De Instalación Y Seguridad

LED UFO HIGH-BAY FIXTURE
Models: 65-181, 65-182, 65-183, 65-184, 65-185, 65-186
65-191, 65-192, 65-193, 65-194, 65-195, 65-196
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
• To avoid damage, falling, electric shock or fire, do not modify the fixture or replace
accessories without confirming with the supplier first.
• Only authorized, qualified personnel should install this fixture and should follow
the owner's manual. Any improper installation might cause failure, electric shock,
fire or other injury, damage or hazard.
• Disconnect power before installation or any maintenance of the fixture.
• Do not dismantle the fixture without the supplier's authorization.
• Do not touch the power supply when the fixture is operating.
• The external flexible cable or cord of this fixture cannot be replaced; if the cord
is damaged, the fixture shall be destroyed.
• For use in environments where an accumulation of non-conductive dust on the fixture
may be expected.
• Mounting heights of fixtures are not to exceed higher than 30m.
IMPORTANT:
This product must be installed in accordance with the applicable
installation
code by a person familiar with the construction and operation of the product and the hazards involved.
SPECIFICATIONS
Model Watts
65-181 / 65-191 100W
65-182 / 65-192 100W
65-183 / 65-193 150W
100-277V
65-184 / 65-194 150W
65-185 / 65-195 200W
65-186 / 65-196 200W
DIMENSIONS
145(5.71")
25
(0.98")
65-183, 65-184
© Copyright 2018 Satco Products, Inc. 10/18
Volts CCT CRI
4000K
5000K
-30°C to +50°C (-22°F to +122°F)
4000K
70+
5000K
4000K
-30°C to +40°C (-22°F to +104°F)
5000K GND
240
(9.45")
25
(0.98")
65-181, 65-182
25
(0.98")
65-185, 65-186
Operating Temperature
L brown black
N
blue white
yellow/green green
127(5")
145(5.71")
WIRING DIAGRAM
L
brown
N blue
GND yellow/green
Dimmable
Dimmable
DIM+ purple
gray
DIM-
INSTALLATION
Removable
3/8" Thread for
pendant mounting
Satco Products, Inc.
Brentwood, NY 11717
black
white DIM+
green
DIM-