Satco NUVO 65-171 Instrucciones De Instalación Y Seguridad

20W ADJUSTABLE LED
VAPOR TIGHT FIXTURE
Models: 65-171, 65-172, 65-173
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING:
Risk of Fire or Electric Shock
Before beginning installation or service, disconnect the power by turning off the circuit
breaker. Turning the power off by using the light switch is not sufficient to prevent
electrical shock. This fixture is for outdoor use and should not be used in areas of limited
ventilation or high ambient temperature. All work should be performed by a qualified
electrician.
IMPORTANT:
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product
and the hazards involved.
SPECIFICATIONS
Watt Input Light Effect
20W 100 – 277 Vac 110 lm/w
INSTALLATION INSTRUCTIONS
STEP 1: Install the desired mounting fitting – recessed box adapter, surface box, pendant,
or wall adapter.
STEP 2: Install the mounting screws (supplied).
STEP 3: Slip the mounting gasket over the power leads and line up the mounting key slots.
STEP 4: Connect the supply leads to the fixture leads – black to black (hot), white to
white (neutral).
STEP 5: Tighten the mounting screws.
TROUBLE SHOOTING
If the light does not work, check the power source and check electrical connections.
DIMENSIONS
6.50" W
© Copyright 2018 Satco Products, Inc. 8/18
Lamp Lamp
Dimension (180º) Dimension (90º)
4.45" W x 12.40" H 6.50" W x 10.20" H
12.40" H
10.20" H
Ceiling Mount
Operating
Temperature
-40ºC ~ +45ºC
Connect the cable
Wall Mount
4.45" W
Satco Products, Inc.
Brentwood, NY 11717