Smartpond 52283 Manual De Instrucciones página 5

Step 2. Place the tubing adapter
on the lower hole of the tank and
use a gasket for it to be sealed
tightly when fastened.
Hand-tighten the locking ring on
the tube inside the tank to secure
the tubing adapter in place.
Step 3. Place the bio-balls in the
bottom of the tank.
Step 4. Place the fine (blue) filter
pad inside the tank. Then place
the coarse (black) filter pad inside
the tank.
Step 5. Place the tubing adapter
on the upper hole of the tank and
use a gasket for it to be sealed
tightly when fastened.
Hand-tighten the locking ring
inside the tank to secure the
tubing adapter in place.
Step 6. Turn over the filter cover
and locate the groove along the
outside edge of the raise surface.
Inspect the o-ring to find the flat
edge. One side will have a curve
and the other side will be flat.
Insert the flat side of the o-ring
down as you place into the groove.
Step 7. Turn the cover with the
o-ring back over and place in the
opening in the filter.
Step 8. Screw the lid onto
the top of the tank. Make
sure the lid is secure or the
filter will leak.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
3
7
2
4
5
6
8
3