Troubleshooting Guide - Springer DC - R Manual Del Usuario E Instalación

- for the models with heaters, it is advisable to turn on the heating
once a month.
- if the device is not going to be used in long time, turn off the main
switch and unplug it.
CABLES
Verify periodically if the power supply cable or register are damaged, for safety do not use
the unit. Before using the equipment again the power supply cable must be replaced by
qualified personnel, manufacturer or specialized technical service.
N

TROUBLESHOOTING GUIDE

Before calling a technician, see how to proceed if your air conditioning device presents
some of the following described symptoms.
TROUBLE
The unit does not work
The unit does not
work properly
Frozen internal heat
exchanger
Water leaks within
the room
PROBABLE CAUSE
1) The main switch turned off
2) Appliance is unplugged
outlet
3) Energy failure
1) Dirty air filter
2) Air flow is blocked
the air flow (curtains, furniture, ...)
3) The room is not well closed
4) There is some heat source
5) Thermostat knob is not
correctly placed
6)The device is under
dimensioned for the premises
1) Unproper air flow
2) Dirty air filter
1) Clogged drainage
2) Improper installation
17
SOLUTIONS
1) Turn main switch back on
2) Plug your unit to the electrical
3) Wait for the energy to come back
1) Clean the air fliter
2) Remove objects interfering with
3) Be sure all the doors and
windows are well closed
4) Supress any heat source
5) Place the thermostat knob
correctly according to this
handbook
6) Chose a larger model to fulfill
your needs
1) Move objects that may be
blocking the air flow
2) Clean the air filter
1) Unclogged the drainage
2)Install the unit properly according
to this handbook