Reese Chevy Serie 2011 Instructions De Montage página 5

REESE™ Elite Series
TOOLS
Safety Glasses
Impact Wrench Impact Wrench
1-1/8" Socket
1. Check all the boxes for all the components listed in
2. Locate the middle of the truck bed using the measurements shown. Using the 3-1/2" hole saw, cut a hole in the
location shown in
NOTE:
TM
Fig 7
Fig. 8
30158N – 8/25/2010 REV A
GOOSENECK ASSEMBLY
Figure 7 or Figure 8 below.
Figure 7 is used in accordance with Long bed (8') trucks only
Figure 8 is used in accordance with Short bed (6') trucks only
Long bed Truck (8')
Short bed Truck (6')
PCN14046 ©2010 CEQUENT PERFORMANCE PRODUCTS, INC.
3-1/2" Hole Saw
Torque Wrench Torque Wrench
Figure 1 and become familiar with component terminology.
Note: The 24-1/8"
measurement will be
the center of the truck bed th t f th t
Note BOLD
: The holes (3 ea.)
are needed for the gooseneck
application. All other cuts pp
are optional with our Elite
Series Fifth Wheel, Kit #
30143, 30142.
Note: The 24-1/8"
measurement will be
the center of the truck bed
Printed in XXXX
k b d
5