Care And Maintenance - Jole i-Gemm 2 Manual De Instrucciones

!
Press the recline adjustment
button, and adjust the infant child
restraint to the proper position.
There are 7 recline angles with
rearward facing mode.
!
The most convenient way to install
the infant child restraint is when the
th
base is in the 7 position.
!
Pull up on the infant carrier module
to be sure it is securely latched into
the base.
9.To release the infant carrier module,
pull the infant carrier module up
while squeezing the infant carrier
module release button.
13
10.To remove the base, press the
secondary lock button first
and then the button on the ISOFIX
connectors before removing
the base from the vehicle seat.
14
9
13
2
1
14
1
2
11.Press the ISOFIX release button to
store the ISOFIX.
15

Care and Maintenance

!
After removing the foam wedge of insert, please store it somewhere
that the child cannot access it.
!
Please wash the seat cover and inner padding with cold water under
30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted detergents, gasoline or other organic solvent to
wash the infant carrier module or base. It may cause damage to the
infant child restraint.
!
Do not twist the seat cover and inner padding in an attempt to dry. It
may leave the seat cover and inner padding with wrinkles.
!
Please hang dry the seat cover and inner padding in the shade.
!
Please remove the infant child restraint and base from the vehicle
seat if not in use for a long period of time. Put the infant child
restraint in a cool, dry place and somewhere your child cannot
access it.
15
2
1
10