Publicidad
Idiomas disponibles
Idiomas disponibles
®
HEALTH
1.
Remove all drawers from the dresser.
Pull the drawer out until it stops. Lift up on
the lock catch on the right hand side of the
drawer & push down on the lock catch on
the left hand side of the drawer. Pull out on
the drawer as shown.
TIP: Mark all drawers so they can be easily
re-installed in their original positions.
2.
Place counterweight plate on the inside
floor of the case and move to the side wall
as shown. Mark four (4) pilot hole locations
per counterweight plate.
3.
Remove counterweight plates and drill
pilot holes 1/8" diameter x 1/2" deep in all
eight (8) locations.
4.
Place four (4) counterweight plates (two
per side) in their appropriate positions and
install with eight (8) 1/4-14 x 3/4" pan head
screws.
5.
Re-install drawers in their original
positions.
1
3
2
4
Page 2 of 6
939500563 Rev C
Publicidad
