®
HEALTH
CAUTION
FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN
PROPERTY DAMAGE OR PERSONAL
INJURY.
Read the entire Assembly Direction
before beginning installation or
assembly. Building construction varies
greatly and is outside Steelcase's control.
The Building's Engineer of Record is
responsible for the design of studs,
backing, reinforcement, supporting
members etc. which the units are
attached to and must verify the adequacy
of the mounting hardware. These
instructions and any hardware provided
by Steelcase are for convenience only
and are not an indication of what may be
required by your local Code.
The building owner or designated agent
is responsible for verifying that the
installation is in compliance with all local
Codes and regulations.
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2015 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Ainsley
™
, Senza
™
Add Counterweights for
and Waldorf
™
Dressers
PHILLIPS DRIVE
1/8" DIAMETER
DRILL BIT
English - Pages 1 to 2 of 6
Spanish - Pages 3 to 4 of 6
Arabic - Pages 5 to 6 of 6
939500563 Rev C