Operation
1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control.
Rotate the volume control to adjust the volume.
2
Setting wireless push buttons
Wireless push buttons (not included) have two options
for tune selection: Play the selected "FRONT" door
musical tune or play the "REAR" door designated tune
(Ding).
□
Remove the single jumper inside the push
button to play the selected musical tune.
□
Add the single jumper inside the push button
to play only the Ding tune.
3
Selecting a musical tune
The doorbell has different selectable tunes. The push
button (not included) set as the "REAR" push button
will only play Ding (one note tune). The push button set
as the "FRONT" push button will play either Ding-Dong
(two note tune) or Westminster (eight note tune).
□
Press and release the "TUNE" button on the
doorbell (A) until desired tune is heard.
Care and Cleaning
□
Use a dry cloth to clean the doorbell.
□
Do not use cleaners or polishes.
□
Do not use any fluids on the doorbell.
TUNE – HOLD
1 SECOND.
SYNC – HOLD
TYPE "C"
3 SECONDS.
RESET – HOLD
10 SECONDS.
TYPE "C"
TYPE "C"
TYPE "C"
ON
1 2 3 4 5 6 7 8
1 2
Remove jumper to
set as the "FRONT" door
NOTE: All doorbell models are designed to work with up
to 5 wireless push buttons (sold separately).
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
6
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
ON
1 2 3 4 5 6 7 8
1 2
Add jumper to set
as the "REAR" door
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
A
A