Operation - HAMPTON BAY HB-7778-02 Guía Para El Uso Y Cuidado

Operation

1
Using the strobe light feature
The strobe light feature flashes each time the
doorbell (A) is activated. The number of flashes will
depend upon the tune selected:
Ding (one note): 2 flashes - pause - 2 flashes.
Ding-Dong (two note): 4 flashes - pause - 4
flashes.
Westminster (eight note): 8 flashes - pause - 8
flashes.
2
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control
located on the side. Rotate the thumbwheel up or
down to adjust the volume.
Setting the wireless push
3
button
The wireless push button (B) has two options for tune
selection: Play the selected "FRONT" door musical
tune or play the "REAR" door designated tune (Ding).
Remove the single jumper inside the push
button (B) to play the selected musical tune.
Add the single jumper inside the push
button (B) to play only the Ding tune.
4
Selecting a tune
The doorbell (A) has different selectable tunes. The
push button (B) set as the "REAR" push button (B) will
only play Ding (one note tune). The push button (B) set
as the "FRONT" push button (B) will play either Ding-
Dong (two note tune) or Westminster (eight note tune).
Press the "TUNE" button on the doorbell (A) until
a single "Beep" tone and one flash is played.
Release the button.
Listen or watch for the selected tune and strobe
flashes.
Repeat until the desired tune with strobe
flashes is selected.
Remove jumper to
set as the "FRONT" door
NOTE: All doorbell models are designed to work with up
to 10 wireless push buttons (sold separately).
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
6
A
A
B
Add jumper to set
as the "REAR" door
A