Operation - HAMPTON BAY HB-7901-02 Guía Para El Uso Y Cuidado

Installation (continued)
Mounting the sensor in a wall
6
mounted mailbox
Use double-sided tape (CC) to mount the sensor (B).
Remove paper from both sides of the double-sided
tape (CC) and apply to a clean surface.
Open the lid of the mailbox.
Hold the sensor (B) with the screwdriver slot
pointing upward and the side button on the
right side of the sensor (B).
Apply the double-sided tape (CC) to the back of
the sensor (B) and mount on the inside of the
mailbox lid.
Mounting the sensor in a post
7
mounted mailbox
Use double-sided tape (CC) to mount the sensor (B).
Remove paper from both sides of the double-sided
tape (CC) and apply to a clean surface.
Open the door of the mailbox.
Hold the sensor (B) with the screwdriver slot
pointing upward and the side button on the
right side of the sensor (B).
Apply the double-sided tape (CC) to the back of
the sensor (B) and mount on the inside of the
mailbox lid.

Operation

1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control
located on the side. Rotate the thumbwheel up or
down to adjust the volume.
NOTE: When installed correctly, the red LED on the sensor
will flash when the mailbox lid is opened.
NOTE: When installed correctly, the red LED on the sensor
will flash when the mailbox door is opened.
BB
6
BB
BB
A