- Never add a mattress, pillow or extra padding
to make the child more comfortable as this
would alter the safety features of the system.
- The straps of the safety seat should be fitted
snugly, with being twisted and should be protec-
ted from damage.
- Always remember to fasten the baby in secu-
rely with the safety harness correctly fastened.
The straps should be fitted snugly, and not twis-
ted, making sure that they go correctly over
the child's pelvis (lap belt) and over the child's
shoulders (body belt).
- Do not make any changes to the fastening sys-
tem; this could put the child's safety at risk.
- The fastening system must not be damaged
and must not get trapped by any mobile parts
inside the vehicle or by the car doors.
- Protect the uncovered parts of the restraint
system from direct sunlight so that the baby's
skin does not come into contact with very hot
parts.
42
EN
- It is very important not to use second hand
products, because JANÉ can only guarantee
complete safety for articles used by the origi-
nal buyer.
- These instructions must be followed carefully
for the correct use of the restraint system; fai-
lure to do so may put the child's safety at risk.
- Make sure any companions also know how to
get the child out in the event of an accident.
- Secure any luggage or other objects to reduce
the risk of injuries in the event of an accident.
- The instruction manual should always be kept
with the safety seat.
- The use of accessories or replacement parts
is not permitted and will cancel the guarantee
and any liability claims. Only accessories appro-
ved by JANÉ are excluded from this.
- Your safety seat should be replaced by a new
one whenever it has been involved in an acci-
dent, or sent to the manufacturer with a report