Installation; Location; Transport And Storage - Domus DMP30136 Manual De Uso Y Mantenimiento

3. INSTALLATION

Install the machine according to current regulations
3.1.

Location.

3.1.1. Transport and storage.

The machine must be transported always on its pallet and in its original packaging to guarantee its
integrity. Transport the machine to the definitive work place.
Remove the packaging and make sure that it has not been damaged during transport.
In no event install or keep the ironer outdoors.
If the machine has to be stored for a long time unused, cover it with its original packaging to protect it
from external agents and keep it in the optimum environmental conditions. Disconnecting it from the
mains is also recommended.
3.1.2. Location.
Install the machine in a big room to obtain efficient work conditions and to guarantee the sufficient ease
of movement of the workers using the machine.
The definitive position of the machine must allow its correct use. The distances indicated on the following
drawing must be observed to allow correct maintenance by authorised staff.
Once located in its definitive work place, remove the pallet the ironer is fixed to at the back of the base
with 2 bolts on the base of each cabinet. Keep this pallet with the original packaging for possible and
future movements. Do not push the machine or clear obstacles without the pallet, the machine runs the
risk of deformation and malfunctioning.
-LOCATION OF BOLTS 1 AND 2
22
1 2
-UNSCREW WITH A FLAT SPANNER NO. 13