Digital Control For Models Pm-1025 / Pm-1225 / Pm-1425 - Domus DMP30136 Manual De Uso Y Mantenimiento

VERY IMPORTANT:
1- Iron making the most of the roller's surface. This preventive measure is essential to be able to
make the most of all the heat distributed on the roller and to reduce the wear of the coating.
2- Do not iron folded clothes, as the inside will not be ironed well.
3- Before ironing any clothes, make sure that the buttons, fasteners, clasps, buckles, etc., do not
come into direct contact with the plate. They must be suitably covered or positioned so that they
are facing the roller.
4- Do not iron clothes with synthetic material seams, with printed designs or plastic parts.
5- To reduce energy consumption, we recommend preparing the clothes for ironing so that they
contain a residual humidity of 5% to 10%. Under 5%, creases may appear that are difficult to iron,
if so, you will have to moisten them.
6- During use, do not touch the hot parts (outer top edge of the plate) even after finishing ironing, as
the plate takes a while to cool down.
7- Be careful with your hands during the movement of the plate and when you are putting the
clothes to be ironed inside.
4.6.

Digital control for models PM-1025 / PM-1225 / PM-1425.

6
5
8
7
4
3
2
1
1- "START / STOP" BUTTON
2- "SELECT" BUTTON
3- DECREASE BUTTON
4- INCREASE BUTTON
5- "ALARM" PILOT LIGHT
6- "ON" PILOT
7- "HEAT" PILOT
8- READING DISPLAY
27